www.MWconn.info

Hello,

I found my GSM modem no more able to send text right after first run of MWconn.
To repair, I have to upload modem firmware from scratch.

eg:
at+cmgf=1
at+cmgs="+11111111111"
>blahCTRL+Z
OK

now runing MWconn... it says some errors... sometimes it says nothing...
closing MWconn...

going to term again..
at+cmgf=1
at+cmgs="+11111111111"
>blahCTRL+Z
+CMS ERROR: 97

I'm runing MWconn with default settings but I also tried to install my network, and some more options WITH NO RESULT.

what exactly AT command your application sends to my modem? just interesting )

mike

this solution also fur those who have sending sms continously


after enabling servilog.txt I found the poisoning command )

When you run MWconn it issues AT^SYSCFG=14,2,3FFFFFFF,1,1
and modem goes offline. no more calls, no more text.

to fix it, try to add this AT^SYSCFG=14,2,3FFFFFFF,1,2
to Command field on Device tab.

have fun.

Thank you for your suggestions. But it's of no use, if you don't tell, which modem you're using ...