EDIT
Yes, I can confirm that MWconn works with ZTE MT100, perhaps someone could update the wiki
The following solves the other problems
The default APN and username in the O2 payg appears to be out of date and therefore does not work
The (my in this case) current O2 payg working settings
APN: m-bb.o2.co.uk
Username: o2bb
Perhaps someone could update accordingly
The comm port conflicts seem to have been solved by disabling the usb/psudoCD autorun O2 software install and removing the O2 software.
To do this in Win XP (Home) you will need to use "regedit" to disable autorun completely.
You will need to enter (Hex) b5 into the dword value. Note this will disable autorun in CDrom as well.
See .9 to .15 here
http://antivirus.about.com/od/securityt ... utorun.htm
All now seems to be working well now.
MrGreg
Orig post...................
I have tried to get it working, but it seems to be partly working but not quite?
Config as per drop down selection O2-UK (Obviously I'm in the UK)
Scenario 1.
O2 connection manager off
device shows red led
MWconn just shows "Network Scanning"
MWconn config , Network Analysis shows - No Services Available
Scenario 2.
O2 Connection manager on and connected to O2 GPRS
Device shows green led
(MWconn appears to disconnect O2 and establish its own connection)
MWconn tries to connect and then drops with error 619
or
Reports no active comm port COMM5
MWconn config Network Analysis can often achieve a result, but led often goes red in the process.
Is this likely to work at all, or what do I need to do to make it work?
Many thanks
MrGreg
Network Analysis as follows
Code: Alles auswählen
MWconn 5.6
Network Analysis
2010-05-26 12:13:45'68
UMTS 46% [23420] 3 (forbidden)
UMTS ??% [23430] T-Mobile UK (forbidden)
GPRS 43% [23410] O2-UK
GPRS ??% [23415] Vodafone UK (forbidden)
GPRS ??% [23430] T-Mobile UK (forbidden)
GPRS ??% [23433] Orange (forbidden)
Servlog as follows
Code: Alles auswählen
494 Opened INI file with access "rt".
494 Closed INI file.
494 Opened INI file with access "wt".
505 Closed INI file.
505 The INI file hase been rewritten.
506 Pre-termination.
506 2010-05-26 12:08:30'12 MWconn terminated.
--------------------------------------------------
506 Pre-termination.
000 --------------------------------------------------
2010-05-26 12:10:13'73 MWconn started.
000 Program version 5.6
--- MWconn.ini start
000 --- 01 1AA000000000-0000000025051-00000000000000000000000
000 --- 02 (Please do not change line 01.)
000 --- 05 MWconn 5.6
000 --- 07 LAN=English
000 --- 08 COM=
000 --- 09 DEV=8
000 --- 10 DEVI=
000 --- 11 PIN=
000 --- 12 NET=23410
000 --- 13 APN=payandgo.o2.co.uk
000 --- 14 PPQ=*#10#
000 --- 15 PPC=
000 --- 16 CONA=SE
000 --- 17 CON=Internet
000 --- 18 PASS=CRYPT1QLKRQWYKYWD222DLDLQLKRQD1Q1KDPKMDR
000 --- 19 DAY=
000 --- 20 RND=
000 --- 21 MAXV=0;0;0
000 --- 22 MAXT=0;0;0
000 --- 23 HOMU=
000 --- 24 HOMI=
000 --- 25 HOMO=
000 --- 26 ERR=NOC0 FRZ15 CRC50 TME10 ALG10 FRM10 BUF10 L4
000 --- 27 PING=
000 --- 28 SDLY=0
000 --- 29 ENDM=0
000 --- 30 ENDC=
000 --- 31 END=0
000 --- 32 CMD1=
000 --- 33 CMD2=
000 --- 34 CMD3=
000 --- 35 SMS1=
000 --- 36 SMS2=
000 --- 37 SMS3=
000 --- 38 SMSC=+447802092035
000 --- 39 IPC=
000 --- 40 ICON=1
000 --- 41 BATT=0;0
000 --- 42 MOD=OP
000 --- 43 REM=
000 --- MWconn.ini end
000 Closed INI file.
116 Valid COM ports: COM3;COM4;COM5;COM6;
116 Device: "SENS LT56ADW Modem"
116 Port: "COM3"
116 Port has not been selected.
116 Device: "ZTE Diagnostics Interface"
116 Port: "COM4"
116 Port has not been selected.
116 Device: "ZTE NMEA Device"
116 Port: "COM5"
116 Modem type: ZTE
116 Port selection: as primary, prio 49
116 Driver: USB\Vid_19d2&Pid_0017&MI_01\6&55b0093&0&0001
116 Device preselection: MWconn device number 8
116 Device: "ZTE Proprietary USB Modem"
116 Port: "COM6"
116 Port has not been selected.
137 Retry to open port COM5.
157 Retry to open port COM5.
157 Opened Port COM5.
157 s: AT
159 r:
OK
160 s: ATI
164 r:
Manufacturer: ZTE INCORPORATED
Model: MF100
Revision: BD_O2P671A1F3V1.0.0B01
IMEI: xxxxxxxxxxxxxxx
+GCAP: +CGSM,+FCLASS,+DS
OK
165 Determined device: MWconn device number 8
165 s: AT&F
166 r:
OK
167 s: ATE0V1&D2&C1S0=0
168 r:
OK
168 s: AT+COPS=3,0
169 r:
OK
170 s: AT+CPIN?
171 r:
+CPIN: READY
OK
171 s: AT+CREG=2
172 r:
OK
212 s: AT+COPS=0
213 r:
OK
+CREG: 2,10ac,2a1a
+CREG: 1,10ac,2a1a
224 s: AT+ZSNT=1,0,0
224 r:
OK
+CREG: 2,10ac,2a1a
+CREG: 1,10ac,2a1a
325 s: AT+COPS=?
436 r:
+COPS: (2,"O2-UK","O2-UK","23410",0),(3,"T-Mobile UK","T-Mobile UK","23430",0),(3,"Orange","Orange","23433",0),(3,"Vodafone UK","Vodafone UK","23415",0),
OK
487 s: AT
487 r:
OK
498 s: AT+COPS=1,0,"O2-UK"
498 r:
OK
+CREG: 0,10ac,2a1a
+CREG: 1,10ac,2a1a
509 s: AT+ZSNT=1,0,0
510 r:
OK
+CREG: 2,10ac,2a1a
+CREG: 1,10ac,2a1a
560 s: AT+CSQ
561 r:
+CSQ: 13,99
OK
591 s: AT+CSQ
592 r:
+CSQ: 13,99
OK
623 s: AT+CSQ
623 r:
+CSQ: 13,99
OK
644 s: AT
645 r:
OK
655 s: AT+COPS=1,0,"T-Mobile UK"
697 r:
+CREG: 0,042,cfbc
+CME ERROR: no network service
NO CARRIER
707 s: AT+COPS=1,0,"T-Mobile UK"
728 r:
+CME ERROR: no network service
749 s: AT
750 r:
OK
760 s: AT+COPS=1,0,"Orange"
883 r:
+CME ERROR: no network service
894 s: AT+COPS=1,0,"Orange"
007 r:
+CME ERROR: no network service
027 s: AT
028 r:
OK
039 s: AT+COPS=1,0,"Vodafone UK"
080 r:
+CME ERROR: no network service
091 s: AT+COPS=1,0,"Vodafone UK"
112 r:
+CME ERROR: no network service
113 s: AT+COPS=0
113 r:
OK
124 s: AT+ZSNT=2,0,0
124 r:
OK
225 s: AT+COPS=?
367 r:
+COPS: (3,"T-Mobile UK","T-Mobile UK","23430",2),(3,"3","3","23420",2),
OK
417 s: AT
418 r:
OK
428 s: AT+COPS=1,0,"T-Mobile UK"
470 r:
+CREG: 0,042,cfbc
+CME ERROR: no network service
481 s: AT+COPS=1,0,"T-Mobile UK"
502 r:
+CME ERROR: no network service
522 s: AT
523 r:
OK
533 s: AT+COPS=1,0,"3"
687 r:
698 s: AT+COPS=1,0,"3"
699 r:
OK
709 s: AT+ZSNT=2,0,0
710 r:
OK
760 s: AT+CSQ
761 r:
+CSQ: 99,99
OK
792 s: AT+CSQ
792 r:
+CSQ: 99,99
OK
823 s: AT+CSQ
824 r:
+CSQ: 99,99
OK
854 s: AT+CSQ
855 r:
+CSQ: 99,99
OK
885 s: AT+CSQ
886 r:
+CSQ: 14,99
OK
917 s: AT+CSQ
917 r:
+CSQ: 14,99
OK
948 s: AT+CSQ
949 r:
+CSQ: 14,99
OK
954 Port COM5 closed.
701 Opened INI file with access "rt".
701 Closed INI file.
701 Opened INI file with access "wt".
712 Closed INI file.
712 The INI file hase been rewritten.
713 Pre-termination.
713 2010-05-26 12:14:45'01 MWconn terminated.
--------------------------------------------------
713 Pre-termination.
000 --------------------------------------------------
2010-05-26 12:14:58'93 MWconn started.
000 Program version 5.6
--- MWconn.ini start
000 --- 01 1AA000000000-0000000025051-00000000000000000000000
000 --- 02 (Please do not change line 01.)
000 --- 05 MWconn 5.6
000 --- 07 LAN=English
000 --- 08 COM=
000 --- 09 DEV=8
000 --- 10 DEVI=
000 --- 11 PIN=
000 --- 12 NET=23410
000 --- 13 APN=payandgo.o2.co.uk
000 --- 14 PPQ=*#10#
000 --- 15 PPC=
000 --- 16 CONA=SE
000 --- 17 CON=Internet
000 --- 18 PASS=CRYPT1QLKRQWYKYWD222DLDLQLKRQD1Q1KDPKMDR
000 --- 19 DAY=
000 --- 20 RND=
000 --- 21 MAXV=0;0;0
000 --- 22 MAXT=0;0;0
001 --- 23 HOMU=
001 --- 24 HOMI=
001 --- 25 HOMO=
001 --- 26 ERR=NOC0 FRZ15 CRC50 TME10 ALG10 FRM10 BUF10 L4
001 --- 27 PING=
001 --- 28 SDLY=0
001 --- 29 ENDM=0
001 --- 30 ENDC=
001 --- 31 END=0
001 --- 32 CMD1=
001 --- 33 CMD2=
001 --- 34 CMD3=
001 --- 35 SMS1=
001 --- 36 SMS2=
001 --- 37 SMS3=
001 --- 38 SMSC=+447802092035
001 --- 39 IPC=
001 --- 40 ICON=1
001 --- 41 BATT=0;0
001 --- 42 MOD=OP
001 --- 43 REM=
001 --- MWconn.ini end
001 Closed INI file.
001 Valid COM ports: COM3;COM4;COM5;COM6;
001 Device: "SENS LT56ADW Modem"
001 Port: "COM3"
001 Port has not been selected.
001 Device: "ZTE Diagnostics Interface"
001 Port: "COM4"
001 Port has not been selected.
001 Device: "ZTE NMEA Device"
001 Port: "COM5"
001 Modem type: ZTE
001 Port selection: as primary, prio 49
001 Driver: USB\Vid_19d2&Pid_0017&MI_01\6&55b0093&0&0001
001 Device preselection: MWconn device number 8
001 Device: "ZTE Proprietary USB Modem"
001 Port: "COM6"
001 Port has not been selected.
022 Retry to open port COM5.
042 Retry to open port COM5.
062 Retry to open port COM5.
082 Retry to open port COM5.
102 Retry to open port COM5.
122 Retry to open port COM5.
122 Port COM5 could not be opened.
122 Opened INI file with access "wt".
132 Closed INI file.
133 The INI file hase been rewritten.
153 Retry to open port COM5.
173 Retry to open port COM5.
193 Retry to open port COM5.
213 Retry to open port COM5.
233 Retry to open port COM5.
253 Retry to open port COM5.
253 Port COM5 could not be opened.
294 Header in INI-file is going to be rewritten.
294 Opened INI file with access "r+t".
294 Header in INI-file has been rewritten.
294 Closed INI file.
294 Pre-termination.
294 2010-05-26 12:15:28'34 MWconn terminated.
--------------------------------------------------
294 Pre-termination.