Help connect Huawei e1752
Forumsregeln
In most fault cases it is necessary to create a Service Log
In most fault cases it is necessary to create a Service Log
Help connect Huawei e1752
I have Huawei wireless terminal e1752 and run AT^U2DIAG=276 to enable network adaptor in it.
After this, at software Mobile Parner appeared connection type "ndis" which makes local area connection instead dial-up. The thing is, I do not want use Mobile Parner as it disables "show windows contents" option in Windows.
Anyway, if I do not run this software, under "Network Connections" the Huawei 3G card shows as "network cable disconnected". It only connects if I connect with Mobile Partner.
I'd like to get the internet work now with MWconn, so I put in information as follows:
At Device tab i choose: Huawei
Serial port: COM8 (did try also COM7, didn't work)
APN: internet
At Connection tab: Connection mode "network, manual" and put in "HUAWEI Mobile Connect - 3G Network Card", "Use NDIS commands".
It tries to connect and I see it recognizing my network provider name. Then it will say: connection error 1 - which means as I understood that network card is not found.
Is there any way to get this working? What should I try? To put something in Service terminal to enable network card first? But what??
edit: inside connlog.txt I found:
2010-10-24 16:51:10'21 Selected operating mode: UMTS.
2010-10-24 16:51:24'41 Connection refused. Error 1.
So that means, need to input some extra commands? If I make connection with dial-up it is working. Only network connection will not work.
After this, at software Mobile Parner appeared connection type "ndis" which makes local area connection instead dial-up. The thing is, I do not want use Mobile Parner as it disables "show windows contents" option in Windows.
Anyway, if I do not run this software, under "Network Connections" the Huawei 3G card shows as "network cable disconnected". It only connects if I connect with Mobile Partner.
I'd like to get the internet work now with MWconn, so I put in information as follows:
At Device tab i choose: Huawei
Serial port: COM8 (did try also COM7, didn't work)
APN: internet
At Connection tab: Connection mode "network, manual" and put in "HUAWEI Mobile Connect - 3G Network Card", "Use NDIS commands".
It tries to connect and I see it recognizing my network provider name. Then it will say: connection error 1 - which means as I understood that network card is not found.
Is there any way to get this working? What should I try? To put something in Service terminal to enable network card first? But what??
edit: inside connlog.txt I found:
2010-10-24 16:51:10'21 Selected operating mode: UMTS.
2010-10-24 16:51:24'41 Connection refused. Error 1.
So that means, need to input some extra commands? If I make connection with dial-up it is working. Only network connection will not work.
- Hammergott
- Beiträge: 574
- Registriert: Do 17. Dez 2009, 02:12
- Wohnort: 25524/Schleswig-Holstein
Re: Help connect Huawei e1752
Why do you want to use the Stick as Network-Card? Use it as Dial-Up,
Connection-Type Automatic, NO NDIS-Commands, Device Huawei,
try Com 7or 8, in Windows Dial-Up Network-Adapter, which should
be created by MWconn, named Internet the active Modem should be
the Huawei-Modem! NDIS-Commands, at the Moment, are only for a
few Option-Cards! Check, if the APN is right for your Provider!
To use MWconn with your Stick as Dial-Up, be sure that no Mobile
Partner Soft/Services are running/active!
Regards
Hammergott
P.S.: Read your Edit too late, so only my first question!
Connection-Type Automatic, NO NDIS-Commands, Device Huawei,
try Com 7or 8, in Windows Dial-Up Network-Adapter, which should
be created by MWconn, named Internet the active Modem should be
the Huawei-Modem! NDIS-Commands, at the Moment, are only for a
few Option-Cards! Check, if the APN is right for your Provider!
To use MWconn with your Stick as Dial-Up, be sure that no Mobile
Partner Soft/Services are running/active!
Regards
Hammergott
P.S.: Read your Edit too late, so only my first question!
Home: FRITZ!Box 7590 / FRITZ!Repeater 1200
Mobil: ZTE MF667
Home: O2 my Home M 100
Mobil: T-Mobile
Möge der Hammergott mit Euch sein!
Mobil: ZTE MF667
Home: O2 my Home M 100
Mobil: T-Mobile
Möge der Hammergott mit Euch sein!
Re: Help connect Huawei e1752
So the ndis not working with this e1752? I need network connection as on Windows 7 dial-up disconnects itself on fast user switching with multiple Windows users. I leave my msn running under my user and go to class, then my boyfriend log in with he's user and it disconnects my msn! I receive no messages from people. Even the dial-up connection is remade, msn will not auto connect itself on dial-up connections, I googled it alrady and no solution for it. So I need ndis...
Re: Help connect Huawei e1752
I'm afraid, NDIS-Commands will not work on HUAWEI hardware yet, sorry. Maybe in the future Markus will improve this feature, who knows?
Re: Help connect Huawei e1752
Oh okey then Thanks, anyway.
Re: Help connect Huawei e1752
I am sorry, NDIS is not possible with MWconn for this device.
Why don't you start MWconn as a Windows service? In this case, the connection would not be disconnected at the user's logout.
Opilionn
Why don't you start MWconn as a Windows service? In this case, the connection would not be disconnected at the user's logout.
Opilionn
Re: Help connect Huawei e1752
Hi! Did remember I posted here and wanted to say, I got everything working, thanks alot for the advice Great program!