MT100 & O2 payg - Update & solution

Support for usage of MWconn
Forumsregeln
In most fault cases it is necessary to create a Service Log
Antworten
MrGreg
Beiträge: 3
Registriert: Mi 26. Mai 2010, 00:42

MT100 & O2 payg - Update & solution

Beitrag von MrGreg » Mi 26. Mai 2010, 14:24

I guess the first question is does MWconn work with an MT100?

EDIT
Yes, I can confirm that MWconn works with ZTE MT100, perhaps someone could update the wiki

The following solves the other problems

The default APN and username in the O2 payg appears to be out of date and therefore does not work
The (my in this case) current O2 payg working settings

APN: m-bb.o2.co.uk
Username: o2bb

Perhaps someone could update accordingly


The comm port conflicts seem to have been solved by disabling the usb/psudoCD autorun O2 software install and removing the O2 software.
To do this in Win XP (Home) you will need to use "regedit" to disable autorun completely.
You will need to enter (Hex) b5 into the dword value. Note this will disable autorun in CDrom as well.

See .9 to .15 here

http://antivirus.about.com/od/securityt ... utorun.htm

All now seems to be working well now.

MrGreg




Orig post...................

I have tried to get it working, but it seems to be partly working but not quite?

Config as per drop down selection O2-UK (Obviously I'm in the UK)

Scenario 1.

O2 connection manager off
device shows red led
MWconn just shows "Network Scanning"
MWconn config , Network Analysis shows - No Services Available

Scenario 2.
O2 Connection manager on and connected to O2 GPRS
Device shows green led
(MWconn appears to disconnect O2 and establish its own connection)
MWconn tries to connect and then drops with error 619
or
Reports no active comm port COMM5
MWconn config Network Analysis can often achieve a result, but led often goes red in the process.

Is this likely to work at all, or what do I need to do to make it work?

Many thanks
MrGreg

Network Analysis as follows

Code: Alles auswählen

MWconn 5.6
Network Analysis
2010-05-26 12:13:45'68

UMTS  46%  [23420]  3  (forbidden)
UMTS  ??%  [23430]  T-Mobile UK  (forbidden)
GPRS  43%  [23410]  O2-UK
GPRS  ??%  [23415]  Vodafone UK  (forbidden)
GPRS  ??%  [23430]  T-Mobile UK  (forbidden)
GPRS  ??%  [23433]  Orange  (forbidden)

Servlog as follows

Code: Alles auswählen

494 Opened INI file with access "rt".
494 Closed INI file.
494 Opened INI file with access "wt".
505 Closed INI file.
505 The INI file hase been rewritten.
506 Pre-termination.
506 2010-05-26 12:08:30'12  MWconn terminated.

    --------------------------------------------------

506 Pre-termination.
000 --------------------------------------------------

    2010-05-26 12:10:13'73  MWconn started.
000 Program version 5.6
    --- MWconn.ini start
000 --- 01 1AA000000000-0000000025051-00000000000000000000000
000 --- 02 (Please do not change line 01.)
000 --- 05 MWconn 5.6
000 --- 07 LAN=English	
000 --- 08 COM=
000 --- 09 DEV=8
000 --- 10 DEVI=
000 --- 11 PIN=
000 --- 12 NET=23410
000 --- 13 APN=payandgo.o2.co.uk
000 --- 14 PPQ=*#10#
000 --- 15 PPC=
000 --- 16 CONA=SE
000 --- 17 CON=Internet
000 --- 18 PASS=CRYPT1QLKRQWYKYWD222DLDLQLKRQD1Q1KDPKMDR
000 --- 19 DAY=
000 --- 20 RND=
000 --- 21 MAXV=0;0;0
000 --- 22 MAXT=0;0;0
000 --- 23 HOMU=
000 --- 24 HOMI=
000 --- 25 HOMO=
000 --- 26 ERR=NOC0 FRZ15 CRC50 TME10 ALG10 FRM10 BUF10 L4
000 --- 27 PING=
000 --- 28 SDLY=0
000 --- 29 ENDM=0
000 --- 30 ENDC=
000 --- 31 END=0
000 --- 32 CMD1=
000 --- 33 CMD2=
000 --- 34 CMD3=
000 --- 35 SMS1=
000 --- 36 SMS2=
000 --- 37 SMS3=
000 --- 38 SMSC=+447802092035
000 --- 39 IPC=
000 --- 40 ICON=1
000 --- 41 BATT=0;0
000 --- 42 MOD=OP
000 --- 43 REM=
000 --- MWconn.ini end
000 Closed INI file.
116 Valid COM ports: COM3;COM4;COM5;COM6;
116 Device: "SENS LT56ADW Modem"
116  Port: "COM3"
116  Port has not been selected.
116 Device: "ZTE Diagnostics Interface"
116  Port: "COM4"
116  Port has not been selected.
116 Device: "ZTE NMEA Device"
116  Port: "COM5"
116  Modem type: ZTE
116  Port selection: as primary, prio 49
116  Driver: USB\Vid_19d2&Pid_0017&MI_01\6&55b0093&0&0001
116  Device preselection: MWconn device number 8
116 Device: "ZTE Proprietary USB Modem"
116  Port: "COM6"
116  Port has not been selected.
137 Retry to open port COM5.
157 Retry to open port COM5.
157 Opened Port COM5.
157 s:  AT


159 r:  

OK


160 s:  ATI


164 r:  

Manufacturer: ZTE INCORPORATED

Model: MF100

Revision: BD_O2P671A1F3V1.0.0B01

IMEI: xxxxxxxxxxxxxxx

+GCAP: +CGSM,+FCLASS,+DS



OK


165 Determined device: MWconn device number 8
165 s:  AT&F


166 r:  

OK


167 s:  ATE0V1&D2&C1S0=0


168 r:  

OK


168 s:  AT+COPS=3,0


169 r:  

OK


170 s:  AT+CPIN?


171 r:  

+CPIN: READY



OK


171 s:  AT+CREG=2


172 r:  

OK


212 s:  AT+COPS=0


213 r:  

OK



+CREG: 2,10ac,2a1a



+CREG: 1,10ac,2a1a


224 s:  AT+ZSNT=1,0,0


224 r:  

OK



+CREG: 2,10ac,2a1a



+CREG: 1,10ac,2a1a


325 s:  AT+COPS=?


436 r:  

+COPS: (2,"O2-UK","O2-UK","23410",0),(3,"T-Mobile UK","T-Mobile UK","23430",0),(3,"Orange","Orange","23433",0),(3,"Vodafone UK","Vodafone UK","23415",0),



OK


487 s:  AT


487 r:  

OK


498 s:  AT+COPS=1,0,"O2-UK"


498 r:  

OK



+CREG: 0,10ac,2a1a



+CREG: 1,10ac,2a1a


509 s:  AT+ZSNT=1,0,0


510 r:  

OK



+CREG: 2,10ac,2a1a



+CREG: 1,10ac,2a1a


560 s:  AT+CSQ


561 r:  

+CSQ: 13,99



OK


591 s:  AT+CSQ


592 r:  

+CSQ: 13,99



OK


623 s:  AT+CSQ


623 r:  

+CSQ: 13,99



OK


644 s:  AT


645 r:  

OK


655 s:  AT+COPS=1,0,"T-Mobile UK"


697 r:  

+CREG: 0,042,cfbc



+CME ERROR: no network service



NO CARRIER


707 s:  AT+COPS=1,0,"T-Mobile UK"


728 r:  

+CME ERROR: no network service


749 s:  AT


750 r:  

OK


760 s:  AT+COPS=1,0,"Orange"


883 r:  

+CME ERROR: no network service


894 s:  AT+COPS=1,0,"Orange"


007 r:  

+CME ERROR: no network service


027 s:  AT


028 r:  

OK


039 s:  AT+COPS=1,0,"Vodafone UK"


080 r:  

+CME ERROR: no network service


091 s:  AT+COPS=1,0,"Vodafone UK"


112 r:  

+CME ERROR: no network service


113 s:  AT+COPS=0


113 r:  

OK


124 s:  AT+ZSNT=2,0,0


124 r:  

OK


225 s:  AT+COPS=?


367 r:  

+COPS: (3,"T-Mobile UK","T-Mobile UK","23430",2),(3,"3","3","23420",2),



OK


417 s:  AT


418 r:  

OK


428 s:  AT+COPS=1,0,"T-Mobile UK"


470 r:  

+CREG: 0,042,cfbc



+CME ERROR: no network service


481 s:  AT+COPS=1,0,"T-Mobile UK"


502 r:  

+CME ERROR: no network service


522 s:  AT


523 r:  

OK


533 s:  AT+COPS=1,0,"3"


687 r:  
698 s:  AT+COPS=1,0,"3"


699 r:  

OK


709 s:  AT+ZSNT=2,0,0


710 r:  

OK


760 s:  AT+CSQ


761 r:  

+CSQ: 99,99



OK


792 s:  AT+CSQ


792 r:  

+CSQ: 99,99



OK


823 s:  AT+CSQ


824 r:  

+CSQ: 99,99



OK


854 s:  AT+CSQ


855 r:  

+CSQ: 99,99



OK


885 s:  AT+CSQ


886 r:  

+CSQ: 14,99



OK


917 s:  AT+CSQ


917 r:  

+CSQ: 14,99



OK


948 s:  AT+CSQ


949 r:  

+CSQ: 14,99



OK


954 Port COM5 closed.
701 Opened INI file with access "rt".
701 Closed INI file.
701 Opened INI file with access "wt".
712 Closed INI file.
712 The INI file hase been rewritten.
713 Pre-termination.
713 2010-05-26 12:14:45'01  MWconn terminated.

    --------------------------------------------------

713 Pre-termination.
000 --------------------------------------------------

    2010-05-26 12:14:58'93  MWconn started.
000 Program version 5.6
    --- MWconn.ini start
000 --- 01 1AA000000000-0000000025051-00000000000000000000000
000 --- 02 (Please do not change line 01.)
000 --- 05 MWconn 5.6
000 --- 07 LAN=English	
000 --- 08 COM=
000 --- 09 DEV=8
000 --- 10 DEVI=
000 --- 11 PIN=
000 --- 12 NET=23410
000 --- 13 APN=payandgo.o2.co.uk
000 --- 14 PPQ=*#10#
000 --- 15 PPC=
000 --- 16 CONA=SE
000 --- 17 CON=Internet
000 --- 18 PASS=CRYPT1QLKRQWYKYWD222DLDLQLKRQD1Q1KDPKMDR
000 --- 19 DAY=
000 --- 20 RND=
000 --- 21 MAXV=0;0;0
000 --- 22 MAXT=0;0;0
001 --- 23 HOMU=
001 --- 24 HOMI=
001 --- 25 HOMO=
001 --- 26 ERR=NOC0 FRZ15 CRC50 TME10 ALG10 FRM10 BUF10 L4
001 --- 27 PING=
001 --- 28 SDLY=0
001 --- 29 ENDM=0
001 --- 30 ENDC=
001 --- 31 END=0
001 --- 32 CMD1=
001 --- 33 CMD2=
001 --- 34 CMD3=
001 --- 35 SMS1=
001 --- 36 SMS2=
001 --- 37 SMS3=
001 --- 38 SMSC=+447802092035
001 --- 39 IPC=
001 --- 40 ICON=1
001 --- 41 BATT=0;0
001 --- 42 MOD=OP
001 --- 43 REM=
001 --- MWconn.ini end
001 Closed INI file.
001 Valid COM ports: COM3;COM4;COM5;COM6;
001 Device: "SENS LT56ADW Modem"
001  Port: "COM3"
001  Port has not been selected.
001 Device: "ZTE Diagnostics Interface"
001  Port: "COM4"
001  Port has not been selected.
001 Device: "ZTE NMEA Device"
001  Port: "COM5"
001  Modem type: ZTE
001  Port selection: as primary, prio 49
001  Driver: USB\Vid_19d2&Pid_0017&MI_01\6&55b0093&0&0001
001  Device preselection: MWconn device number 8
001 Device: "ZTE Proprietary USB Modem"
001  Port: "COM6"
001  Port has not been selected.
022 Retry to open port COM5.
042 Retry to open port COM5.
062 Retry to open port COM5.
082 Retry to open port COM5.
102 Retry to open port COM5.
122 Retry to open port COM5.
122 Port COM5 could not be opened.
122 Opened INI file with access "wt".
132 Closed INI file.
133 The INI file hase been rewritten.
153 Retry to open port COM5.
173 Retry to open port COM5.
193 Retry to open port COM5.
213 Retry to open port COM5.
233 Retry to open port COM5.
253 Retry to open port COM5.
253 Port COM5 could not be opened.
294 Header in INI-file is going to be rewritten.
294 Opened INI file with access "r+t".
294 Header in INI-file has been rewritten.
294 Closed INI file.
294 Pre-termination.
294 2010-05-26 12:15:28'34  MWconn terminated.

    --------------------------------------------------

294 Pre-termination.

hErMeS
Administrator
Beiträge: 331
Registriert: Sa 26. Jul 2008, 11:47
Kontaktdaten:

Re: MT100 & O2 payg - Update & solution

Beitrag von hErMeS » Mi 9. Jun 2010, 10:22

This Page shows the existing APN in our Settings is payandgo.o2.co.uk
http://service.o2.co.uk/IQ/SRVS/CGI-BIN ... 2819041%29

Do you have payandgo?

MrGreg
Beiträge: 3
Registriert: Mi 26. Mai 2010, 00:42

Re: MT100 & O2 payg - Update & solution

Beitrag von MrGreg » Mi 9. Jun 2010, 15:13

Yes, the SIM card pack is titled "O2 Mobile Broadband Pay & Go USB Modem"

It was purchased new about early May this year
Re Your link
I also checked two other websites which also said the O2 APN was "payandgo.o2.co.uk" So at first I thought that the APN must be correct.
I then checked the details in the O2 Connection Manager and found the APN and Username to be as per my previous post. Entered them into the MWconn settings and it worked.

If other UK O2 users following this thread could post back their working APNs/Usernames for O2 payg that would be usefull info for all.

Antworten